I made a doll quilt before Christmas and realized I’d never posted a tutorial on this quick and easy binding method. Since I know a lot of you are beginners…this is a really great way to dip your toes into binding a quilt. I especially love it for small things like hot pads, table toppers, or a mini quilt.
1. Baste your quilt. Normally I would cut the batting the exact same size as the quilt top…but in these pictures using this method was an afterthought. Believe me though…it’s much much easier to start with the batting the same size as the quilt top!
![IMG_2769_thumb[1]](http://cluckclucksew.com/wp-content/uploads/2014/01/IMG_2769_thumb1.jpg)
2. Quilt like normal…except make sure none of your stitches go into the batting. Start and stop all of your quilting stitches on the quilt top and backstitch.
3. Carefully cut the batting away (if it was a bit larger than the quilt top). This is tricky if you’ve quilted to the edge…which is why I recommend keeping your batting the exact same size as your quilt top before you start. I’ve cut through many backings by accident doing this!
4. Trim the backing fabric, leaving 1” around all sides of the quilt top.
5. Start anywhere, and fold the binding over halfway…
![IMG_2791_thumb[1]](http://cluckclucksew.com/wp-content/uploads/2014/01/IMG_2791_thumb1.jpg)
…and then in half again, and pin. You can do this on your ironing board and press it as you go…it makes it very simple. Fold all the way down to the next edge.
![IMG_2800_thumb[1]](http://cluckclucksew.com/wp-content/uploads/2014/01/IMG_2800_thumb1.jpg)
6. When you get to a corner, fold the corner up like so…
![IMG_2803_thumb[1]](http://cluckclucksew.com/wp-content/uploads/2014/01/IMG_2803_thumb1.jpg)
…then fold the next edge in half…
…and in half again to make a nice mitered corner. Pin it in place. You might have to play with the corner a bit, but once you actually do this it will make sense.
Continue until you’ve folded and pinned the binding around the whole quilt.
7. Sew it down using a walking foot, right along the edge of the binding. Sew to the corner and leave the needle in the fabric as you lift the presser foot and turn to go down the next edge. Easy as pie.
Now there are a couple of reasons I don’t love this method:
1. It’s hard to square up the quilt and keep the edges nice and straight. So I only use this on small things.
2. You have to plan so your backing fabric will also look great as your binding fabric.
3. If you quilt to the edge of your quilt top…you’re going to see it in the binding of the quilt on the back. I normally wouldn’t quilt to the edge using this method and instead quilt 1” away from the edge or so…but it was an afterthought with this little quilt.
And there you go…an easy way to do bindings! If you’re a beginner who is mastering bindings…here’s my other tutorial on a Machine Binding a quilt.
That´s a perfect idea. Thank you so much for that.
Greetings from Germany,
Linda 🙂
thanks for this tip – your instructions were very clear and helpful – will try this out on my next small quilt.
thank you for these instructions, sounds much easier than a separate binding and looks good too
Thanks for the helpful tips!
Happy New Year!
Hi! Thank you for a great idea and tutorial! Often I have been thinking that normal binding needs too much fabric and time when making something small. This looks great and if we like, we could plan the backing so that there is a stripe with other colour. Happy NEW Year! x Teje
Great tutorial. I'm a newbie when it comes to quilts so this is really useful. Thank you.
Thank you for great tutorial. I was wonderring how to do this so I am so happy I can try it. Thanks.
I have tried to do this before but I didn't know how to deal with the corners! Thanks so much.
Such a pretty quilt and love the quilting ~ straight lines are the best!
I've done this method a few times but usually on a smaller quilt. It really saves time and looks great too!
Awesome tutorial. When I first started quilting this is how I did it because I didn't know about binding at all!
What a wonderful tutorial! This is also a great way to bind mug rugs as well. This technique is what I used for some of my kid's quilts, and they are holding up great 🙂
Excellent toot!! Crystal clear instructions and great pics!
P
Very cool trick, and a super cute choice in fabrics too!
Thank you for sharing! What a great idea, I'll definitely try this out – woop 🙂
This is great. Thanks for the binding tip! I'll have to make a table runner just so I can try this technique out. haha Where did you get your pins btw? They are so cute!
Great photos…and a great technique! I am going to try this!
Thank you for sharing.
So great Alison! I've been using this method for years (it's how I learned to quilt) and use it to teach my friends. I'll have to reference your wonderful tutorial now, especially with such fabulous photos! Best, Kate
Thank you so much for this, I will be giving this a try soon.
Thanks for the great tutorial! I'm always looking for binding shortcuts!
Your tutorial is so clear and your photos are so helpful! This helps me SO MUCH!!!! I create miniature quilts and all is beautiful, but I'm terrified of BINDING!!!! Tee, hee.
Nice of you to share your expertise with us, beautiful doll quilt.
Thank you for teaching me this! I've learned so much from you on your blog. All the way from how to piece together batting to sewing together HST's with using tape. Your pictures are lovely. Thanks again for taking the time to share with all of us who are learning but don't have a physical person close who knows how to quilt to show us!
I'm so glad it was helpful for you Julia!!! Have a great day! -Al
I love this method! Thanks for sharing a brilliant idea
I'm a handquilter and I've been binding all my quilts this way for 30 years or so. The only thing I do different is when I fold the 1" of backing over, I slide the edge under the batting about 1/8" of an inch. That way, when I make the second fold a double layer of binding covers the quilt edge.
I was looking at one of my daughter's quilts the other day that I made in the mid-80s. The binding has worn thru so I need to replace it. This time, I'll use bias binding just like I would on any old quilt that needed a new one.
Great idea and sure I`ll try it and gorgeous fabrics.Thanks
What a cute little quilt! ~Angela~
This is awesome! Thank you 🙂
It looks really good! Thanks!
I was just about to do this on a baby quilt, and it turned out great. Thanks for the help!
Thanks for sharing… especially the photos of how to do the corners! I will be sure to give this a try.
This is my favorite way to bind a quilt! I'm featuring this at my frugal sewing site Sewistry next week: http://sewistry.com/2014/01/cheaper-way-bind-quilt/. Please let me know of any concerns.
Thank you for inspiring me to try this method. For baby quilts and quick ones, it sure saves time.
Great tutorial! Thanks! x http://www.craftygoodness.co.uk
This method works really well with Mugrugs.
Great tutorial! I was especially interested in how the corners were handled.
Very clean and concise.
Liz
In the way old days we used to bind all our quilts this way. Now that some of those quilts are approaching their third decade, the edges are wearing out. And now it's not easy to re-bind them. I know no one plans to have quilts around for 20+ years, but it happens. One day you wake up and that quilt is still here, but now with worn edges that need a new binding (quilt is still going strong). Having older quilts around gives a perspective on solid vs. shoddy construction, too.
Glad you mentioned your dislikes. Since I'm an older quilter, I see also what time does, too.
I love reading your blog, but don't always comment–you have such fresh and beautiful designs (esp. love your new patterns!).
Elizabeth
opquilt.com
Thanks! Used this today to bind my first quilt! 🙂
I love this! Thank you for posting it! I plan to make one.
One funny thing, I kept wondering why you were adding a button to the binding! I thought maybe you were just showing the width of the binding. Finally, while showing my daughter, I realized it was part of the pin!
I love this! Thank you for posting it! I plan to make one.
One funny thing, I kept wondering why you were adding a button to the binding! I thought maybe you were just showing the width of the binding. Finally, while showing my daughter, I realized it was part of the pin!
Thanks for this great tutorial! I am about to do this on a baby quilt. Glad I found your photos and detail on how to fold the corners!
Emily at backtothecraft.blogspot.ca
Gracias por compartir tus conocimientos .. 🙂
http://dreamspaki.blogspot.com.es/
I just found this post when I asked google how to self bind a quilt. Thank you for this. I am now helping at church to make quilts that we send Lutheran Word Relief for charity. I wasn't sure if I did the mitre corner right. When I read your post, I found out that I did it right.
Hi – I just finished a summer pinwheel table runner, backed with a printed seersucker (yay for the clearance rack!) and found that this tutorial was perfect for a small project like that! Thank you!
This is SUCH a time-saver!!! It only took me about 15-20 minutes to bind a 64 inch by 76 inch throw quilt. 🙂
I love this idea. I am a newbie quilter so I really want to try this.
Allison, this is my favorite way of binding a quilt. I have done it this way since I began two years ago despite never having seen it done. I had seen only strip bindings where you have to do the bias folding. Well, once I saw in my own studio the easiness of this method, I was sold. Just like tying instead of trying to quilt on my tiny Singer.
Love your blog, your designs, and your openness and sharing. Thanks very much.
Thanks for the tutorial. This is a great way to bind little items, like coasters or mug rugs.
Thank you for this clear tutorial! I found it on a google search. I've messed up so many corners of self-bindings over the years! I never could seem to get the folds to stay right. My latest project turned out perfectly.
This was the way that I first learnt to bind quilts back in the 1980s and was glad to move on to present day methods. However, it's a very good way for quick, machined binding instead of having to sew by hand on the back. Thanks for the reminder.
Thank you so much for the tutorial. Is it possible to use this method for large items such as a lap quilt? Thank you again for inspiration and lessons. God bless.
Rohini
Thanks for such clear pictures and text. I'd previously struggled with my corners. I used this method to bind a bed runner. It was my first attempt at free quilting and as I was concerned about untidy loopy stitches showing through on the back of the quilt I used a piece of sheeting to back the quilt. I then used a 'good' piece of fabric to back and bind the finished quilt. Thanks again. Brenda K
I just tried this – thank you very much for your excellent how-to. 🙂
I have been struggling with this problem for a while and could never get a neat finish. Then I found your post which is the clearest that I have found and now have no problem finishing my quilts.
Thank you for a helpful post.
Thank you sooooo much. I've been learning to quilt now for about a year, and binding seems to be my greatest challenge, but this is the first tutorial that I feel I can actually accomplish without the stress of trying to finish my project. Thank you again so very much for sharing
I found your blog via Pinterest and so glad I did. This is exactly what I have been searching for. I am a very new beginner quilter. A friend of mine started a quilt for my little guy. She started the binding using the backing and she started by hand stitching. Well it was taking soooo long for her to finish this quilt (that I had every intention to do myself but she decided she was going to make it, well insisted) after months of waiting for the quilt I finally went and picked it up and insisted machine sewing would be faster then hand stitching. Considering I stay so busy with our farm the little one and our rescue kennel I didn't want to hand stitch this quilt with all the dogs and a little one always wanting right in the mix of things. I can't wait to get this quilt finished which was suppose to been done before Christmas ☺️ Now I will definitely be getting on This today !!! Thanks so much for all your tutorials they are all so helpful to us beginners and ALL of your quilts are just beautiful !!
Thank you so much for this tutorial, this is a nice and quick way to complete small projects. By the way, at mitered corner, I did cut off some fabric to reduce the bulk.
Thanks again.
Christine
Perfect, clear instructions, this technique will be well worth trying on small items. Thankyou for sharing.
Would it be okay to link to your binding tutorial on our guild blog page. I love how simple you make this look.
Thank you, I’m about to start my first ever quilt and this method looks very neat and certainly less daunting.
I love the way you machine quilted the squares! and thank you for the easy to understand tutorial using back piece as binding. Working on a toddler size one tomorrow and needed this instruction!
This is the easiest thing I’ve seen yet. You made my day. I was just getting to finish a baby quilt and didn’t want to spend a lot of time on it. This will be the cats Meow. Thank you, Linda’s Quilts
After using this method on a large quilt, I will never go back to any other. It’s easy and the best part is that you don’t have to piece together fabric to make a binding.
Great tutorial! Used this as help when finishing my first quilt ever this sunday and it turned out great (for a first quilt, I still have lots to learn…) ! Thank you for a great and inspiring blog 🙂
Great for placemats!! Thanks!
Thank you! Just beginning quilting and loved this binding method. Helped me get my first project done quickly and easily.
I am a beginner and haven’t started my first quilt or binding, but I could totally follow your tutorial! Thank you for leaving in your mistakes! makes it easier for a beginner like me to remember the tips and see to not do the same thing!
I’m a new quilter also and found your blog with lovely pics very helpful, great to have another option for binding….I did not know this one 🙂
Thank you so much I just finished my first baby quilt with your method I think this will work for table toppers.
Thank you so very very much. I have developed arthritic hands, fingers and wrist. I no longer can hand sew my bindings. Your tutorial using your quilt back is so excellent, I put the picture of your mitered corner right in front of me and it turned out perfectly. Thank you again….Pearlybear
Thank you for your simple instructions on finishing corners. Very valuable and helped me to finally finish a quilt that has been on the go for 6 years!
thank you for sharing this! i usually bind my quilts the traditional way, so whenever i decide to use this method i have to check back on your site to refresh my memory. today, however, i must have food on my brain, because i opened this post and started scrolling down through the text and photos, looking for the recipe. when i realized there wasn’t a recipe for christmas cookies (or whatever i was subconsciously looking for), i had a good laugh. so thanks again!
How funny! You are in Christmas mode for sure! 😉
Saved my life. I’ve always used binding strips and self binding a pair of pot holders threw me for a loop! Just couldn’t figure out what to do with all of the extra fabric at the corners. Thank you!
I’m so glad it helped!!
I accidentally cut the backing fabric in 2 places when trimming the batting. Is there any way to still bind with backing?
You’d have to stitch it back together where you trimmed it off, tricky but possible!
Did you mean don’t quilt right up to the edge? Bit confused